Industry 4.0 · Water 4.0

What is Water 4.0?

What industry calls Industry 4.0 is called Water 4.0 in water networks: a network that measures itself, transmits its data and adjusts itself intelligently. Alton brings your network to this architecture in four layers that form one chain.

Infographic: Water 4.0 – four layers, one chain. 1 Measure: Alton pressure and level transmitters. 2 Log and control on site: Alton Data Logger and Smart Valve Controller, powered or battery-operated. 3 Communicate: 4G, NB-IoT, Ethernet with MQTT, OPC UA and Modbus. 4 Software: FlowChief dashboard, alarms and reports. Control stays on site – if communication is lost, the valve keeps working.
1

Measure

Reliable data starts in the field. Pressure and level are measured continuously at the points that matter: critical network points, PRV stations, reservoirs, wells and pump stations.

With Alton
  • Alton pressure transmitters
  • Alton hydrostatic level transmitters
  • Existing flowmeters and analysers can be connected as well
Pressure Transmitter →
2

Log & control on site

The data logger records the values and the smart valve controller acts on them, right at the site. Both come in an externally powered and a battery-powered version, so sites without power are covered too.

With Alton
  • Alton Data Logger & Edge, delivered as a Plug & Play Panel
  • Alton Smart Valve Controller, a retrofit for existing valves of any brand
  • Local data storage while the connection is down
Data Logger & Edge →
3

Communicate

Data travels over the network that suits the site: cellular or wired. Alton devices speak open industrial standards, so they are not tied to one software vendor.

With Alton
  • 4G and low-power NB-IoT cellular, or Ethernet
  • MQTT, OPC UA and Modbus
  • Connects to FlowChief or to your own SCADA
Software & Monitoring →
4

Software

All sites come together in one place: dashboards, network map, alarms, reports and analysis. Alton is a Silver Partner of FlowChief; the software service is optional.

With Alton
  • FlowChief dashboards, alarms and reports
  • Hosted by Alton or installed on your own server
  • Optional: one-time setup fee plus annual subscription
Software & Monitoring →

Control stays on site

Decisions are made where the valve is, not in a distant server. If communication is lost, the valve keeps working on its last setting, and the battery-powered controller always holds a stable mechanical setting.

Open standards, no lock-in

MQTT, OPC UA and Modbus connect Alton devices to FlowChief or to any standard SCADA. Your data stays yours.

Start small, grow step by step

Start with a few points, for example one pressure zone, and extend to the whole network without changing the architecture.

The solution

Control stays on site — if communication is lost, the valve keeps working.

Let's talk about your network

Tell us where you want to start. We will suggest the first points and the right package.

Contact us